electric car conversion kits for sale

Showing posts with label Kostov electric motors for cars. Show all posts
Showing posts with label Kostov electric motors for cars. Show all posts

Wednesday, April 11, 2012

K11" 168V SepEx

this motor is a conceptual model illustrating that a SepEx motor can be just as powerfull as a series one

Voltage: up to 168 VDC


HP:48.5hp=36kw

K9" 96V SepEx


A low voltage SepEx motor that can run in the 48-96V range making good use of the many standard SepEx controllers available for such voltages

Diameter: 22cm=8.66" 

Length: 35.7cm=14"

Voltage: up to 96 VDC


HP:27.5hp=20.5kw


Weight:48kg


K9" 120V SepEx

This is a light and very flexible motor covering the 80-120V range

Diameter: 22cm=8.66" 
Length: 35.7cm=14"


Voltage: up to 120 VDC


HP:24.5hp=18.3kw


Weight:45kg

K13" DirectDrive

This motor is for heavy vehicles or sportier conversions without a gearbox.
 It offers 300A, 65kW and 140Nm (double the torque typical for an 11") as nominal.
This ensures long range for pickup trucks, buses and vans.

Diameter: 32.6cm=12.8" 
Length: 57.5cm=22.6"


Voltage: up to 250 VDC


HP:87.13hp=65kw


Weight:130kg

K11" Alpha

The most powerful 11" motor kostov motors have ever built.
It can supply 50kW/85Nm nominal and at 75kg is 8% lighter than K11" 250V.
Efficiency is also increased to 88.7%. The back flange is custom designed to allow as much air through as possible.
Shaft mounted fan is out while forced air cooling is standard.
This makes the motor very quiet even at high speed and ventilation is not dependent on rpm

Diameter: 26.5cm=10.43" 
Length: 43.2cm=17"


Voltage: up to 250 VDC


HP:67hp=50kw


Weight:75kg

K11" 250V

The motor's field swithcing option allows driving mods optimal for both racing and city driving.
Series field mode gives lower rpm and higher torque both at a reduced amp draw making it ideal for the typical city conditions with frequent starts/stops and low average speed.
parallel field mode increases rpm and nominal amp draw while decreasing torque a bit

Diameter: 26.5cm=10.43" 
Length: 40.6cm=16"


Voltage: up to 250 VDC


Series Field Mode 250v
HP:60hp=44.8kw


Parallel Field Mode 192v
HP:54.15hp=40.4kw

Weight:81kg

K9" 220V

This motor have a switchable stator field with Series Field Mode  Parallel Field Modeand covers 96-220V all at optimised rpm

Diameter: 22cm=8.66" Length: 38.1cm=15"


Voltage: up to 220 VDC


Series Field Mode 220v
HP:41.8hp=31.2kw

Parallel Field Mode 144v
HP:28.1hp=21kw


Weight:42kg

K11" dual 340V



When raw power is all that matters, nothing can beat a dual 11" motor.
This beast is designed with racing in mind (parallel connection is best suited for racing while series is to be preferred for normal driving) and rpm are optimised so it achieves good rpm even under severe overload.
The assumption is that a 300-350V controller is used with at least a 1400A rating so that full advantage can be taken of the motor.
Stator coils are beefed up so racing stress is easier to the motor.



Voltage: up to 400 VDC


HP:96.5hp=72kw

Diameter: 26.5cm=10.43" 
Length: 83.3cm=32.8"

K9" dual 300V

This motor has several advantages. It can go to the controller's max voltage of 300-340V, has slightly more power and has the flexibility of series/parallel connections.
These qualities make it is a good for racing choice whereby parallel mode is used for racing while series mode for normal driving.

Diameter: 22cm=8.66" 
Length: 73cm=28.7"

Voltage: up to 288 VDC

HP:64.34hp=48kw




K9" 96V

K9" 96V is suitable for heavy lead acid conversions where voltage is limited

Diameter: 22cm=8.66" 
Length: 38.1cm=15"


Voltage: up to 96 VDC


HP:27.47hp=20.5kw


Weight:42kg

K9" 144V

This motor weights only 45kg while capable of 200A/40Nm continuosly

Diameter: 22cm=8.66" 
Length: 38.1cm=15"


Voltage: up to 144 VDC


HP:32hp=23.9kw


Weight:42kg

K10" 144V

This motor is competing with popular 9" (9.25") models from other producers.
Despite having a 10.5" diameter, it is much shorter and 6-7kg lighter than the competitors


Diameter: 26.5cm=10.43" 
Length: 37.6cm=14.8"

Voltage: up to 144 VDC

HP:42.35hp=31.6kw

Weight:69kg

K11" 192V

This is a classic 11" motor that can handle 250A continuosly and is conservatively rated for 192V

Diameter: 26.5cm=10.43" 
Length: 40.6cm=16"

Voltage: up to 192 VDC

HP:54.15hp=40.4kw

Weight:81kg

18AC9" 100Hz 3-phase ac motor

Dimensionally the same as 10AC9", 18AC9" is optimised for 67VAC
(96VDC battery) and 100Hz/2900rpm. As a result peak power has increased
to 18kW while top torque is 120Nm. Shaft and flange coupling dimensions are identical to those of the popular Kostov/Netgain DC motors.

Diameter: 22.9cm=9" 
Length: 29.1cm=11.47"


Voltage: up to 96 VDC


HP:13.4hp=10kw

10AC9 3-phase ac motor

This motor is designed to run on 32-67VAC
(requires a 48-96VDC battery)
Featuring 40kW (with a 550A controller) of peak power
Suitable for really small electric vehicles like golf carts, ATVs, etc
An RPM sensor bearing and a thermistor are standard equipment

Diameter: 22.9cm=9"
Length: 29.1cm=11.47"

Voltage: 48 VDC


HP:9.38hp=7kw